Corrugated Cardboard Printer for Used

Details:

With the lowest total cost of ownership of any machine in its class, VISIONCUT 1.6 delivers high-quality flat-bed die-cutting. Additionally, VISIONCUT 1.6 is offered in a PR version with Power Register, a cutting-edge solution that provides unmatched print-to-cut precision even on litho-laminated board. Pre-start Inspection Measures for Corrugated cardboard printer for used 1. Verify the integrity and regular operation of all electrical control switches and buttons. 2. Verify that the power supply voltage is operating normally (voltage fluctuation range: 360-400V). 3. Verify the main drive system's functionality. 4. Verify that the sliding rails, paper feed grid, etc. are operating smoothly. 5. Verify that the rubber and anilox rollers are in normal contact. 6. Examine how well the water-based ink pump is working. 7. Examine each cylinder and pressure spring's operational state. 8. Verify that the slotting section's top and lower cutters are positioned correctly. 9. Be mindful of where the front and rear slotting cutters are located; do not touch them when making adjustments. 10. Look for noticeable wear or damage on the slotting cutters. 11. Verify the tightness of the die-cutting roller screws. 12. Examine each gearbox's circulation lubrication and oil quality. 13. Examine the air compressor's operation, stability, and air pressure. 14. Examine each mechanical transmission component's functionality. 15. The touchscreen shows every clearance. The computer uses an internal formula to determine the displayed values from the mechanical zero point. The mechanical zero point may move after the machine has been operating for a while because of unusual circumstances. Therefore, before every startup, carefully check the difference between the presented and true data for safe use. This can be fixed by making adjustments. 16. Keep precise operating, maintenance, and lubrication logs for every shift.

Send Inquiry

Description

Send Inquiry

Model:SPO160
Year:2005
Whatsapp contact:+8613928813765

251

Details

With the lowest total cost of ownership of any machine in its class, VISIONCUT 1.6 delivers high-quality flat-bed die-cutting.

Additionally, VISIONCUT 1.6 is offered in a PR version with Power Register, a cutting-edge solution that provides unmatched print-to-cut precision even on litho-laminated board.

Pre-start Inspection Measures for Corrugated cardboard printer for used

1. Verify the integrity and regular operation of all electrical control switches and buttons.
2. Verify that the power supply voltage is operating normally (voltage fluctuation range: 360-400V).
3. Verify the main drive system's functionality.
4. Verify that the sliding rails, paper feed grid, etc. are operating smoothly.
5. Verify that the rubber and anilox rollers are in normal contact.
6. Examine how well the water-based ink pump is working.
7. Examine each cylinder and pressure spring's operational state.
8. Verify that the slotting section's top and lower cutters are positioned correctly.
9. Be mindful of where the front and rear slotting cutters are located; do not touch them when making adjustments.
10. Look for noticeable wear or damage on the slotting cutters.
11. Verify the tightness of the die-cutting roller screws.
12. Examine each gearbox's circulation lubrication and oil quality.
13. Examine the air compressor's operation, stability, and air pressure.
14. Examine each mechanical transmission component's functionality.
15. The touchscreen shows every clearance. The computer uses an internal formula to determine the displayed values from the mechanical zero point. The mechanical zero point may move after the machine has been operating for a while because of unusual circumstances. Therefore, before every startup, carefully check the difference between the presented and true data for safe use. This can be fixed by making adjustments.
16. Keep precise operating, maintenance, and lubrication logs for every shift.