Tech parameters

Data/model	900x2000	900x2400	1200x24000	1200x2800	1400x2400	1400x2800	1600x2800	1600x3200	1600x3600
Max machine speed(pcs/min)	300	300	250	220	220	200	200	180	120
Max feeding size(mm)	880x2000	880x2400	1180x2400	1180x2800	1380x2400	1380x2800	1570x2800	1570x3200	1570x3600
Min feeding size(mm)	280x660	280x660	320x680	320x680	360x680	360x680	420x710	420x710	420x710
Skip feeding(mm)	1100x2000	1100x2400	1500x2400	1500x2800	1700x2400	1700x2800	1900x2800	1900x3200	1900x3600
Max printing area(mm)	850x2000	850x2400	1150x2400	1150x2800	1350x2400	13500x2800	1540x2800	1540x3200	1540x3600
Thickness of printing plate(mm)	7.2	7.2	7.2	7.2	7.2	7.2	7.2	7.2	7.2

Features about flexo printing machine for corrugated carton

Gears in a helical gear transmission system are polished and quenched at high frequencies;
Multicolor printers can be integrated and linked in any manner;
The machine electronically returns to zero once the paper feeding unit, printing unit, and die-cutting unit are combined. The PLC and 7-inch touch screen are designed to accomplish accurate and dependable variable frequency management. In addition to having automatic chromatography and proof printing several cardboards to determine the correct register location and minimize cardboard waste, ordinary boxes automatically return to zero;

Front baffle clearance adjustment

Zeroing adjustment (Electric adjustment)

Before zeroing and adjusting, combine the paper feeding and printing units.

1. If the transmission gears cannot mesh when merging the units, use a wrench to slightly rotate the manual transmission shaft to re-engage them.

Auxiliary air intake (Manual adjustment)

1. The cardboard should be flush against the ribbed paper feed table, allowing it to be smoothly pushed into the feed rollers.

2. If the cardboard is smaller than the suction range of the paper feed table, any excess suction vents must be covered or closed to prevent air leakage.

1. Adjust the suction power by rotating the switch according to the size and warping of the cardboard.

2. If longer cardboard pieces cannot fall smoothly (insufficient suction at the rear of the cardboard), remove the first suction baffle on the paper feed table to increase the suction area. (When handling small pieces of cardboard, be sure to reinstall the baffle to prevent air leakage.)

3. If the suction power is insufficient, check for air leaks or pipe blockages.

Paper feeding method selection

1. Single sheet feed

2. Continuous feed

3. Skip sheet feed (intermittent feed)

4. Stop feed

1. One sheet of cardboard is fed per activation, suitable for trial printing.

2. For cardboard sizes generally 1150mm or less, continuous printing is recommended.

Hot Tags: flexo printing machine for corrugated carton, China flexo printing machine for corrugated carton manufacturers, suppliers, factory, Flexo Corrugated Box Printing Machine, flexible packaging printing, Fully Automatic Corrugated Box Making Machine, Flexo Printing Machine For Corrugated Carton, Fully Automatic Carton Box Making Machine, 4 Color Flexo Printing Machine