Inkjet Printer for Carton Box

Inkjet printer for carton box 's die-cutting roller has a bottom roller (knife die roller) and an upper roller (rubber pad roller) Ø 388.9mm. It is constructed of premium steel. 487mm, hard chrome-plated, calibrated, and balanced.
A big machining center produces the wall panel, which has a thickness of 50mm and is composed of premium cast iron.
3. The rubber pad roller's automatic grinding mechanism increases the rubber sleeve's rate of reuse and allows for three to four repairs.

Four polyurethane gaskets with five million die-cutting cycles are simple to install.
The rubber pad wears uniformly, and the mechanical soft roller shifts horizontally by 40mm.
Note: By using a pneumatic lifting shaft, the bottom die roller can prolong the life of Yuli glue and lessen wear.
Note: The strength of the circle template and the adhesive can be changed when the circular template is in use, and there is a limiting position device when the knife die roller is raised. It can lessen the degree of damage to the adhesive.

1) The outer diameter of the blade shaft (lower roller) is φ 156 mm. Superior thick-walled, seamless steel pipe with strong chrome plating and a polished surface. To improve operating stability, adjust the balance.
2) The outside diameter of the upper roller is 176mm. Superior thick-walled, seamless steel pipe with strong chrome plating and a polished surface. To improve operating stability, adjust the balance.
3) Using a self-locking mechanism, the distance between the slotting knife and the bottom knife can be manually changed between 0 and 11 mm.
4) Planetary gear structure and phase adjustment device. Computer and electric digital control allow for a 360-degree adjustment of the slotting phase (both operation and stop can be modified).
5) The section on links
6) The paper press, slotting knife, and wire roller are all manually synchronised and adjusted.
7) Four knives are used to manually and synchronously modify the slotted box's height.