Model:1600x3200
Tech parameters
| Data/model | 900x2000 | 900x2400 | 1200x24000 | 1200x2800 | 1400x2400 | 1400x2800 | 1600x2800 | 1600x3200 | 1600x3600 |
| Max machine speed(pcs/min) | 300 | 300 | 250 | 220 | 220 | 200 | 200 | 180 | 120 |
| Max feeding size(mm) | 880x2000 | 880x2400 | 1180x2400 | 1180x2800 | 1380x2400 | 1380x2800 | 1570x2800 | 1570x3200 | 1570x3600 |
| Min feeding size(mm) | 280x660 | 280x660 | 320x680 | 320x680 | 360x680 | 360x680 | 420x710 | 420x710 | 420x710 |
| Skip feeding(mm) | 1100x2000 | 1100x2400 | 1500x2400 | 1500x2800 | 1700x2400 | 1700x2800 | 1900x2800 | 1900x3200 | 1900x3600 |
| Max printing area(mm) | 850x2000 | 850x2400 | 1150x2400 | 1150x2800 | 1350x2400 | 1350x2800 | 1540x2800 | 1540x3200 | 1540x3600 |
| Thickness of printing plate(mm) | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 |
Slotting Operation Instructions and Work Guidelines for Inkjet carton printer
Gap adjustment is further subdivided into the following situations:
a. Adjustment of the gap between the upper and lower pre-press rollers:
● Pre-pressing applies pressure to the corrugated cardboard to break the corrugations and can also be used as a guide roller. The gap adjustment range here is 0-9mm. Generally, the gap value is less than 1/2 of the cardboard thickness.
b. Adjustment of the gap between the upper and lower crease rollers of Inkjet carton printer:
● Creasing creates indentations on the corrugated cardboard to facilitate subsequent processes. The gap adjustment range here is also 0-7mm, and the gap value should be appropriately smaller. Generally, the gap value is 1/4 of the cardboard thickness.
c. Adjustment of the gap between the upper and lower cutter roller seats:
● This is where the cardboard is separated, slotted, and corner-cutting is completed. The size of the gap here directly affects the final work quality of the slotting section. The gap adjustment range is also 0-8mm. Generally, the height at which the upper cutter engages with the lower cutter is 3-6mm. It should not be too deep, otherwise, uneven slotting and abnormal damage to the corner-cutting blade may occur.
Of course, users can adjust the gap value according to their actual work experience to achieve the most ideal product quality.
● Corner Cutting Blade Adjustment for Inkjet carton printer
1. For 3-layer and 5-layer corrugated cardboard, the height of the corner cutting blade should be adjusted, see part #5 in the figure below.
2. The #4 resin cushioning pad will wear down over time and needs to be replaced with a new one in a timely manner.
3. Corner cutting blades are consumable parts and should be kept in sufficient stock. Once dull or rolled, they should be re-sharpened; continued use should not be forced.
Hot Tags: inkjet carton printer, China inkjet carton printer manufacturers, suppliers, factory, Flexo Printing Corrugated Box, Carton Flexo Printing Machine, Flexo Die Cutting Machine, Inkjet Carton Printer, paper box making machine, carton printing machinery
