Model:HKM900X200
Tech parameters
| Data/model | 900x2000 | 900x2400 | 1200x24000 | 1200x2800 | 1400x2400 | 1400x2800 | 1600x2800 | 1600x3200 | 1600x3600 |
| Max machine speed(pcs/min) | 300 | 300 | 250 | 220 | 220 | 200 | 200 | 180 | 120 |
| Max feeding size(mm) | 880x2000 | 880x2400 | 1180x2400 | 1180x2800 | 1380x2400 | 1380x2800 | 1570x2800 | 1570x3200 | 1570x3600 |
| Min feeding size(mm) | 280x660 | 280x660 | 320x680 | 320x680 | 360x680 | 360x680 | 420x710 | 420x710 | 420x710 |
| Skip feeding(mm) | 1100x2000 | 1100x2400 | 1500x2400 | 1500x2800 | 1700x2400 | 1700x2800 | 1900x2800 | 1900x3200 | 1900x3600 |
| Max printing area(mm) | 850x2000 | 850x2400 | 1150x2400 | 1150x2800 | 1350x2400 | 1350x2800 | 1540x2800 | 1540x3200 | 1540x3600 |
| Thickness of printing plate(mm) | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 |
Printing Unit Cleaning and Maintenance Project for small corrugated box making machine
Weekly maintenance
Printing roller, impression roller, paper pull roller, anilox roller spindle
Bearing parts: Lubricate with oil.
Lubricate the machine's fixed lock and connecting lock rod.
Wipe the plate mounting shaft (if the plate tension is not tight, replace the ratchet).
Remove ink clumps from the ink fountain and ink tube using a specialized cleaning solution for small corrugated box making machine.
Remove dried ink from the anilox rollers within the cells.
Remove dried ink residue from the ink pump, ink supply system, and ink filter. Check for loose, leaking, or damaged pipe joints. Use warm water for maintenance in cold winter temperatures.
Inspect cylinder pipe joints for looseness, leaks, or damage.
Check the small wall panel for flexibility; if necessary, add oil or adjust the nuts on it.
The ink tank holder must be cleaned thoroughly every time for small corrugated box making machine.
Maintenance items and key points for grooved areas
Daily maintenance of slotted units
Check the gearbox lubricating oil level; add oil if it is below the lower limit (new machines must be replaced after three months, other machines should be replaced annually).
Wipe and clean the surfaces of the pressure roller, grooving cutter roller, and connecting plate roller, as well as the surface of the moving lead screw and the lead screw lubricant. Alternatively, clean them with an air hose. (Use a 90% diesel fuel + 10% engine oil solution for wiping.)
Wipe away paper scraps and dust adhering to the machine.
Key points for maintenance of project parts small corrugated box making machine
Lubricate the bearings of the crimping shaft, slotting shaft, and connecting plate shaft.
The grooving cutter, pressure roller, moving screw, and chain were coated with a mixture of 90% diesel fuel and 10% engine oil, and the chain tension was checked.
Wipe the preload roller, crimping roller, grooving cutter holder, and connecting plate holder, and apply diesel fuel.
Lubricate the grooving tool position adjustment gear.
The corner cutter's buffer pad needs to be replaced when it is worn.
If the retaining screws of the angle cutter or grooving cutter become loose, they must be re-tightened; if they are worn, they must be replaced.
The groove of the pressure roller seat is wiped and lubricated.
Inspect cylinder line connectors for looseness, leaks, or damage; replace any damaged ones.
Check if the knife stops in the middle position small corrugated box making machine.
The chip scraper/chip strip should fit the lower cutter head well, without any jumping, and with appropriate lubrication.
Check if the grooving blade is worn or if it needs to be replaced on one side, or adjust the lead screw's slippage.
Hot Tags: small corrugated box making machine, China small corrugated box making machine manufacturers, suppliers, factory, Fully Automatic Cardboard Box Printer Machine, Small Corrugated Box Making Machine, Corrugated Box Machine Cost, Carton Box Paper Making Machine, printing press machinery, Flexo Press Printing Equipment
